Originally Posted by Neal Moritz /t/1448494/harman-kardon-avr-1700-software-update-helppost22901477 I have a Galaxy S2 and this reciever isn't setup to use it in any way, I can't even get the HK remote control app to work. The operation will fail, but you will have jolted the receiver out of update mode. If done correctly, you will be looking at the Harman Kardon web interface for the receiver. Then plug it back in, flip the switch back to on, then hold the Surr Mode button for. If done correctly, you will be looking at the Harman Kardon web interface for the receiver.Ĭlick the Choose File button and choose any random file on your computer. Turn it to off, then unplug the power cable. Type the IP address of your AVR 1700 into a web browser on your computer (it should like this: 192.168.1.xxx, with the last three digits based on your individual network). You can do this by logging into your wireless router's web interface, or by using a utility like this one: Using your computer, determine the IP address of the AVR 1700 on your local network.
It is recommended that you read this instruction manual before using. For me, this meant temporarily moving my cable modem and wireless router into the living room and connecting the receiver to my router with an ethernet cable. Increase the separation between the equipment and receiver. You're done.For anyone who has found this thread because their AVR 1700 is stuck in BCO Update mode, I wanted to post a the solution that worked for me this morning:Ĭonnect your AVR 1700 to your home network. The operation will fail, but you will have jolted the receiver out of update mode. My AVR 1700 shows an update warning screen 'BCO UPDATE' and freezes. If done correctly, you will be looking at the Harman Kardon web interface for the receiver.Ĭlick the Choose File button and choose any random file on your computer.
For me, this meant temporarily moving my cable modem and wireless router into the living room and connecting the receiver to my router with an ethernet cable. Type the IP address of your AVR 1700 into a web browser on your computer (it should like this: 192.168.1.xxx, with the last three digits based on your individual network). For anyone who has found this thread because their AVR 1700 is stuck in BCO Update mode, I wanted to post a the solution that worked for me this morning: Connect your AVR 1700 to your home network. p0llinate : Then plug back in, if no change, we will do a microprocessor reset: p0llinate : Put receiver in Standby mode (press the front panel Standby/On Switch so that the Power Indicator turns amber). Using your computer, determine the IP address of the AVR 1700 on your local network. To start, lets first unplug power to the receiver for at least 5 minutes. For anyone who has found this thread because their AVR 1700 is stuck in BCO Update mode, I wanted to post a the solution that worked for me this morning:Ĭonnect your AVR 1700 to your home network.
0 kommentar(er)
